Acura TL Se 2013 Advanced Guide
![Acura TL Se 2013 Sedan manual cover](/images/fHwkBgqLhqmXlYnMsdxfPLVG/thumbs/thumb175x175.webp)
The recommended oil type for the Acura TL SE 2013 Sedan is 5W-20. It's best to use synthetic oil for optimal performance and longevity.
The timing belt on the Acura TL SE 2013 should typically be replaced every 60,000 to 100,000 miles. Refer to your owner's manual for specific intervals.
The recommended tire pressure for the Acura TL SE 2013 is 33 PSI for both front and rear tires. Always check the tire pressure when the tires are cold.
To reset the maintenance light, turn the ignition to the ON position, press the SELECT/RESET button until the oil life is displayed, then hold the button for 10 seconds until the maintenance light resets.
Use Honda ATF DW-1 automatic transmission fluid for the Acura TL SE 2013 to ensure proper transmission function and longevity.
First, check the battery in the key fob. If the battery is good, try reprogramming the key fob or check for any blown fuses related to the keyless entry system.
Common issues include worn-out struts and shocks, which can cause a bumpy ride or poor handling. It's important to inspect these components regularly and replace them as needed.
To improve fuel efficiency, maintain proper tire pressure, ensure regular engine maintenance, use the recommended grade of motor oil, and avoid aggressive driving habits.
If the check engine light comes on, first check for any loose or damaged gas caps. If the problem persists, use an OBD-II scanner to read the error codes or consult a professional mechanic for diagnosis.
To replace the headlight bulb, open the hood, locate the back of the headlight assembly, disconnect the power connector, remove the old bulb, and insert the new bulb. Be sure not to touch the glass part of the new bulb with your fingers.