Acura MDX 2012 Advanced Guide
![Acura MDX 2012 SUV manual cover](/images/xkCMeBUozznVnOGycLCcXwMC/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2012 Acura MDX, turn the ignition to the "ON" position without starting the engine. Use the INFO button on the steering wheel to navigate to the "Maintenance Info" screen. Press and hold the "SEL/RESET" button until the maintenance light begins to blink. Release the button, then press and hold it again until the light is reset.
The 2012 Acura MDX is recommended to use 5W-20 full synthetic oil to ensure optimal performance and efficiency. Always check your owner's manual for the most accurate information.
To replace the cabin air filter, open the glove box and remove the damper on the right side. Press the sides of the glove box inward to release it from the dashboard. The cabin air filter is located behind the glove box. Remove the cover and replace the old filter with a new one, ensuring the airflow direction is correct.
The 2012 Acura MDX has a maximum towing capacity of 5,000 pounds when properly equipped with the available towing package. This includes a transmission cooler and heavy-duty brakes.
If the Bluetooth system is not working, first ensure that your phone is compatible and that Bluetooth is enabled on both the vehicle and the phone. Try deleting and re-pairing the device in the car's Bluetooth settings. If problems persist, check for any software updates for both the vehicle and the phone.
The recommended tire pressure for a 2012 Acura MDX is typically 33 psi for both the front and rear tires. However, always refer to the sticker located on the driver's side door jamb for the most accurate information.
To jump-start your 2012 Acura MDX, park a vehicle with a fully charged battery close to your MDX. Turn off both vehicles. Connect the positive jumper cable to the positive terminal of your MDX's battery, then connect the other end to the positive terminal of the donor battery. Connect the negative cable to the donor battery's negative terminal, and the other end to an unpainted metal surface on your MDX. Start the donor vehicle, then your MDX. Once started, remove the cables in reverse order.
Common issues with the 2012 Acura MDX transmission include rough shifting, delayed gear engagement, and transmission fluid leaks. Regular maintenance, such as fluid changes and inspections, can help prevent these issues. If you experience persistent problems, consult with a certified Acura technician.
Programming a new key fob for a 2012 Acura MDX typically requires the assistance of a professional locksmith or a dealership, as special equipment is needed to synchronize the fob with the vehicle's security system. Contact your local Acura dealer for assistance.
To check the transmission fluid level, warm up the engine to normal operating temperature. Park on a level surface and turn off the engine. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert it fully and remove it again to check the fluid level. It should be between the upper and lower marks. If low, add the recommended transmission fluid type.