Acura RL 2010 Advanced Guide
![Acura RL 2010 Sedan manual cover](/images/bajLmBzKmQeasMLtoXbHDSKc/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition switch to the ON position without starting the engine. Press the SELECT/RESET knob until the oil life indicator is displayed. Hold the knob for about 10 seconds until the oil life begins to blink. Release the knob, then hold it again for 5 more seconds until the oil life resets to 100%.
The 2010 Acura RL requires 5W-20 synthetic motor oil. Using the recommended oil type helps ensure optimal engine performance and efficiency.
If your Acura RL won't start with a new battery, check the starter, alternator, and ignition switch for faults. Ensure all connections are secure and free of corrosion. It may also be a good idea to check the fuses and relays related to the starting system.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, keeping tires inflated to the correct pressure, and replacing air filters as needed. Avoid aggressive driving and excessive idling to maximize fuel economy.
If the navigation system isn't working, try resetting it by pressing and holding the power button. Check for any blown fuses related to the audio system. If the issue persists, consult the user manual for further troubleshooting steps or visit an Acura dealership for assistance.
To replace the cabin air filter, open the glove box and remove the dampener arm on the right side. Press in on the sides of the glove box to release it. The cabin air filter is located behind the glove box. Remove the old filter and insert the new one, ensuring it is positioned correctly. Reassemble the glove box components.
Brake squeaking can be caused by several factors, including worn brake pads, glazed rotors, or the presence of debris. Inspect the brake pads for wear and replace them if necessary. Cleaning the brake components can also help alleviate squeaking. If the noise persists, have a professional inspect the braking system.
The timing belt on the 2010 Acura RL should typically be replaced every 60,000 to 90,000 miles. Refer to your owner's manual for the specific interval based on your driving conditions. Timely replacement is crucial to avoid engine damage.
The recommended tire pressure for the 2010 Acura RL is typically 32 psi for both the front and rear tires. Always check the tire pressure when the tires are cold and adjust as necessary to maintain optimal performance and safety.
To connect your phone via Bluetooth, ensure your phone's Bluetooth is turned on. Press the 'Phone' button on the steering wheel, and follow the voice prompts to pair your device. Enter the provided passcode on your phone if required. Once paired, you can access phone functions through the vehicle's audio system.