Acura MDX Tech 2013 Advanced Guide
![Acura MDX Tech 2013 SUV manual cover](/images/MDdGMMljywLcZJnRmreYPDMX/thumbs/thumb175x175.webp)
To pair your smartphone, enable Bluetooth on your device. On the MDX, press the "Phone" button on the steering wheel. Select "Yes" when prompted to pair a phone. Choose "Add Bluetooth Device" and follow the on-screen instructions to complete pairing.
For the Acura MDX Tech 2013, it is recommended to use 5W-20 viscosity oil. Ensure you choose a high-quality oil that meets the API certification standards for optimal engine performance.
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Use the "SEL/RESET" button on the steering wheel to navigate to the oil life display. Press and hold the button until the oil life starts to blink, then release and hold again until it resets to 100%.
The recommended tire pressure for the Acura MDX Tech 2013 is 33 psi for both front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
To update the navigation system, visit the Acura Navigation Center website to purchase the latest map update. Follow the instructions provided to install the update using a USB drive or DVD.
If your vehicle won't start, check the battery connections for corrosion. Ensure the battery has sufficient charge. If the problem persists, it may be due to the starter, alternator, or ignition switch, and it is recommended to seek professional assistance.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid rapid acceleration, and reduce idling time. Additionally, removing excess weight from the vehicle can help optimize fuel consumption.
The Acura MDX Tech 2013 has a towing capacity of up to 5,000 pounds when properly equipped. Ensure your vehicle is equipped with the necessary towing package and follow all safety guidelines when towing.
To replace the cabin air filter, open the glove box and remove the damper. Press in on the sides of the glove box to lower it completely. Locate the cabin air filter cover, remove it, and replace the old filter with a new one. Reassemble in reverse order.
If the check engine light comes on, ensure the gas cap is tightly secured, as a loose cap can trigger the light. If the light remains on, use an OBD-II scanner to check for error codes or visit a professional mechanic to diagnose and resolve the issue.