Acctim Sofia 15199 Instructions
![Acctim Sofia 15199 manual cover](/images/45c34fea4b38a7e16ac19645/thumbs/thumb175x175.webp)
To set the time, press and hold the "Set" button until the hour digits start to flash. Use the "Up" and "Down" buttons to adjust the hour, then press "Set" again to move to the minutes. Adjust the minutes in the same way and press "Set" to confirm.
Ensure the alarm is turned on by checking the alarm icon on the display. If it is not visible, press the "Alarm" button to activate it. Also, verify that the alarm time is correctly set and the battery is not depleted.
To change the battery, open the battery compartment located at the back of the clock. Remove the old battery and replace it with a new one, ensuring the correct polarity. Close the compartment securely.
If your clock is losing time, it may be due to a weak battery. Replace the battery with a fresh one. If the problem persists, there might be an internal fault, and professional servicing may be required.
Yes, you can set the clock to a different time zone by manually adjusting the time following the time-setting procedure. Remember to adjust the alarm time accordingly.
To snooze the alarm, press the "Snooze" button when the alarm sounds. This will temporarily silence the alarm for a few minutes, after which it will ring again.
Check if the battery needs replacing as a weak battery can cause display issues. Also, ensure that the clock is not exposed to direct sunlight, which can make the display hard to read.
To turn off the alarm completely, press the "Alarm" button until the alarm icon disappears from the display. This indicates that the alarm is deactivated.
Regularly dust the clock to keep it clean. Avoid exposing it to moisture or extreme temperatures. Replace the battery as needed to ensure accurate timekeeping.
To reset the clock to factory settings, remove the battery and wait for a few minutes before reinserting it. This will clear all settings, and you will need to set the time and alarms again.