Acctim Moritz 71883 Instructions
![Acctim Moritz 71883 manual cover](/images/4b1cb705f67e7ab2c9f67487/thumbs/thumb175x175.webp)
To set the time on the Acctim Moritz 71883, press and hold the 'Set' button until the hour starts flashing. Use the 'Up' and 'Down' buttons to adjust the hour. Press 'Set' again to switch to minutes and adjust accordingly.
To change the battery, gently remove the back cover of the clock, take out the old battery, and replace it with a new AA battery, ensuring the polarity is correct.
Ensure the battery is fully charged and correctly installed. If the problem persists, reset the clock by removing and reinserting the battery.
Yes, you can turn off the alarm by pressing the 'Alarm' button once to deactivate it. The alarm icon will disappear from the display.
Check if the battery needs replacement. If the battery is fine, adjust the display brightness settings if available, or ensure the clock is placed in a well-lit environment.
Press the 'Alarm' button and hold until the hour digit starts flashing. Use the 'Up' and 'Down' buttons to set the desired alarm time. Press 'Alarm' again to confirm.
The Acctim Moritz 71883 is designed to be a silent clock with a sweeping second hand, ensuring minimal noise.
To reset the clock, remove the battery, wait for a few minutes, and then reinsert the battery. This will restore the clock to its default settings.
Use a soft, dry cloth to gently wipe the surface of the clock. Avoid using water or cleaning agents as they may damage the clock.
Ensure the alarm is set correctly and the volume is not muted. Check the battery level, as a low battery can affect alarm functionality.