Acctim Denton 15413 Instructions
![Acctim Denton 15413 manual cover](/images/ff326a55e923e103229e2c8c/thumbs/thumb175x175.webp)
To set the time, press and hold the 'Set' button until the hour digits flash. Use the 'Adjust' button to set the correct hour, and press 'Set' again to switch to minutes. Adjust the minutes similarly and press 'Set' to confirm.
Ensure the DST switch on the back of the clock is set to 'On'. If the issue persists, manually adjust the time following the time-setting instructions.
To change the battery, remove the battery cover on the back of the clock. Replace the old battery with a new AA battery, ensuring the correct polarity. Replace the cover securely.
Use a soft, dry cloth to gently wipe the surface. Avoid using water or cleaning agents as they can damage the clock's finish.
Check if the battery is correctly installed and has enough charge. If the issue persists, try resetting the clock by removing and reinserting the battery.
This could be due to a weak battery. Replace the battery with a new one and reset the time. If the problem continues, the clock may require professional servicing.
No, the Acctim Denton 15413 is designed as a desk clock and does not have mounting provisions for wall installation.
To reset, remove the battery and leave it out for a few minutes before reinserting it. This will reset the clock but also require you to set the time again.
Check if the alarm is correctly set and the volume is not muted. If the issue persists, replace the battery and test the alarm again.
The Acctim Denton 15413 does not have adjustable display brightness. Consider placing it in a location where glare is minimized for better visibility.