Acctim Axel 15688 Instructions

To set the time on your Acctim Axel 15688, press and hold the 'Set' button until the time starts flashing. Use the 'Up' and 'Down' buttons to adjust the hour and minute. Press the 'Set' button again to confirm.
Press and hold the 'Mode' button until the display format starts flashing. Use the 'Up' or 'Down' button to toggle between 12-hour and 24-hour formats. Press 'Mode' again to save the setting.
Ensure that the alarm is set and activated. Check the volume settings and make sure the 'Alarm On' indicator is displayed. If problems persist, try replacing the battery.
To replace the battery, remove the battery cover at the back of the clock. Take out the old battery and insert a new one, ensuring the correct polarity. Replace the battery cover securely.
Check if the date is set correctly by pressing the 'Set' button until the date section starts flashing. Adjust using the 'Up' and 'Down' buttons. Confirm by pressing 'Set' again.
To reset the clock, remove the battery and wait for a few minutes. Reinsert the battery, and the clock will revert to its default settings.
Use a soft, dry cloth to gently wipe the clock's surface. Avoid using water or cleaning solutions as they may damage the clock.
Press the 'Alarm' button until the alarm time flashes. Use the 'Up' and 'Down' buttons to set the desired alarm time. Press 'Alarm' again to activate the alarm.
It is recommended to use standard alkaline batteries for optimal performance, as rechargeable batteries may not provide sufficient power for the clock's functions.
Check if the battery is properly inserted and has sufficient charge. If the issue persists, try replacing the battery. Ensure the clock is placed in a well-lit area.