Xiaomi Mini User Manual
![Xiaomi WiFi Router Mini manual cover](/images/b740d80345a0ff1fd8d017ec/thumbs/thumb175x175.webp)
To set up your Xiaomi WiFi Router Mini, connect the router to a power source and your modem via an Ethernet cable. Use a computer or smartphone to connect to the default WiFi network. Open a web browser and enter "miwifi.com" or "192.168.31.1" in the address bar. Follow the on-screen instructions to complete the setup process.
If you forget the admin password, you can reset the router to factory settings by pressing and holding the reset button on the back of the router for about 10 seconds until the LED indicator starts to blink. This will restore the default settings, and you can set up the router again.
To improve WiFi signal strength, place the router in a central location, away from obstructions and electronic devices that might cause interference. Ensure the antennas are positioned vertically. You can also try switching the WiFi channel in the router settings to reduce interference from other networks.
Yes, the Xiaomi WiFi Router Mini can be used as a range extender. Access the router settings through the web interface, navigate to the 'Network Settings' and select 'Repeater Mode'. Follow the instructions to connect it to your main router.
To update the firmware, access the router's web interface by entering "miwifi.com" or "192.168.31.1" in your browser. Log in with your admin credentials, then navigate to 'System Settings' > 'Firmware Update'. Follow the prompts to download and install the latest firmware.
First, ensure all cables are properly connected. Restart both your router and modem. Check if your internet service is active. If the problem persists, access the router settings and verify that the WAN connection type is correctly set according to your ISP's requirements.
To secure your network, log into the router's web interface and change the default SSID and password. Enable WPA2-PSK encryption for the wireless network. Regularly update the router's firmware. Consider disabling WPS and enabling a guest network for visitors.
To configure parental controls, access the router's web interface and navigate to 'Security Settings' > 'Parental Controls'. Here, you can set time limits, block specific websites, and manage the devices connected to the network.
To restore the router to factory settings, press and hold the reset button located at the back of the device for about 10 seconds until the LED indicator starts blinking. This will erase all configurations and restore default settings.
To set up a guest network, log into the router's web interface and go to 'Network Settings' > 'Guest Network'. Enable the guest network feature and configure the SSID and password. You can also set time limits and access restrictions for the guest network.