Xiaomi SWDK Handheld Electric User Manual
![Xiaomi SWDK Handheld Electric Mop manual cover](/images/d5c6ac7b9dd58cc8ce08a3ba/thumbs/thumb175x175.webp)
To assemble the Xiaomi SWDK Handheld Electric Mop, start by attaching the handle to the main unit. Ensure it clicks into place securely. Next, attach the mop pad to the bottom of the unit. Ensure that it is aligned correctly and securely attached.
The Xiaomi SWDK Handheld Electric Mop is suitable for hard surfaces such as hardwood, tile, laminate, and marble. It is not recommended for carpeted areas.
To clean the mop pads, remove them from the mop head and wash them in warm water with mild detergent. They can be machine washed but should be air-dried to maintain their shape and effectiveness.
If the mop stops working, check the battery charge and ensure it is fully charged. Also, inspect the mop head for blockages or tangled debris, and clean it if necessary.
On a full charge, the battery typically lasts for about 50 minutes of continuous use. This may vary slightly depending on the intensity of usage and the type of surface being cleaned.
Yes, you can use a mild cleaning solution. Add the solution to the water tank as per the manufacturer's recommendations, and ensure it is properly diluted to avoid damage to the mop.
The frequency of replacing mop pads depends on usage frequency and surface type. Typically, replace the pads every 3-6 months or if they become worn out or less effective.
Store the mop in a cool, dry place. Ensure that the mop pads are clean and dry before storage. It's best to keep it upright or hang it if possible to maintain its condition.
No, it is not recommended to use the mop on unfinished wood floors as the moisture can seep into the wood and cause damage. Always test a small area first if unsure.
First, check if the water tank is filled and properly attached. Then, inspect the spray nozzle for any clogs or blockages and clean it if necessary. If the problem persists, refer to the user manual for further troubleshooting steps.