Whistler XP1200i Owners Manual

Whistler XP1200i Power Inverter manual cover

Pages 32

Year 2014

Language(s)

of 32

Whistler XP1200i Power Inverter Specification

The Whistler XP1200i Power Inverter is a high-performance device designed to convert DC power from a vehicle's battery into AC power, suitable for running a wide array of electronic devices and appliances. This inverter boasts a continuous power output of 1200 watts, with a peak surge capacity of up to 2400 watts, ensuring it can handle devices with high startup demands. It features two 120-volt AC outlets that allow users to connect multiple devices simultaneously, along with a USB port for charging smartphones, tablets, and other USB-powered gadgets. The XP1200i is engineered with advanced safety features, including overload protection, short-circuit protection, and thermal shutdown, which safeguard both the inverter and connected devices from potential damage. Its cooling system is enhanced by multiple internal fans, which efficiently dissipate heat during extended use, maintaining optimal performance. The inverter's compact and lightweight design ensures easy installation and portability, making it ideal for use in cars, trucks, RVs, and boats. Additionally, the Whistler XP1200i includes an easy-to-read LED display that provides real-time information on input voltage, output wattage, and battery level, enabling users to monitor the inverter’s status effortlessly. With its robust construction and reliable performance, the Whistler XP1200i Power Inverter is an excellent choice for those in need of dependable power conversion on the go.

Whistler XP1200i Power Inverter F.A.Q.

How do I properly connect the Whistler XP1200i Power Inverter to a battery?

Ensure the inverter is turned off before connecting. Attach the red cable to the positive terminal and the black cable to the negative terminal of the battery. Ensure connections are tight and secure.

What should I do if the inverter does not power on?

Check the battery connections and ensure they are secure. Verify that the battery voltage is within the inverter's operating range. Also, inspect the fuse for any damage and replace if necessary.

Can the Whistler XP1200i be used to power sensitive electronic devices?

Yes, it is designed with built-in protection features suitable for sensitive electronics. However, always ensure the device's power requirements do not exceed the inverter's capacity.

What is the procedure for resetting the inverter after a fault?

Turn off the inverter and disconnect it from the power source. Wait for a few minutes before reconnecting and powering it back on. Ensure all connections are correct before resetting.

How do I maintain the Whistler XP1200i to ensure its longevity?

Regularly check and clean the terminals and connections. Avoid exposure to moisture and extreme temperatures. Store the inverter in a cool, dry place when not in use.

What type of battery is recommended for use with the XP1200i inverter?

A deep cycle battery is recommended, as it provides a steady amount of current over a long period, which is ideal for inverter use.

What are the signs of an overloaded inverter?

An overloaded inverter may shut down, display a warning light, or make a continuous alarm sound. Reduce the load by unplugging some devices and restarting the inverter.

Can I use an extension cord with the XP1200i?

Yes, but it should be a heavy-duty extension cord rated for at least the same power output as the inverter to prevent overheating and power loss.

What is the no-load current draw for the Whistler XP1200i?

The no-load current draw is approximately 0.6 Amps, which is the power consumed by the inverter when no load is connected.

How can I prevent the inverter from draining my vehicle's battery?

Use the inverter only when the vehicle is running, or connect it to an auxiliary battery. Additionally, regularly monitor the battery voltage to ensure it doesn't drop too low.