Whistler GT130Xi Total Band Protection Laser Owners Manual
![Whistler GT130Xi Total Band Protection Laser Radar Detector manual cover](/images/8e17003aadd7ecf9998581f3/thumbs/thumb175x175.webp)
To install the Whistler GT130Xi, mount it on your windshield using the suction cup bracket. Connect the power cord to the detector and plug it into your vehicle's cigarette lighter socket. Adjust the angle for optimal detection.
Total Band Protection means the Whistler GT130Xi can detect all radar and laser signals used by law enforcement, including X, K, and Ka bands, as well as laser guns.
To reduce false alerts, ensure that the detector is mounted correctly and away from other electronic devices. Enable the city mode to filter out non-police radar frequencies commonly found in urban areas.
Regularly clean the detector's lenses with a soft cloth to ensure optimal performance. Check the power cord and suction cups for wear and replace them if necessary.
Visit the Whistler Group's official website to check for firmware updates. Follow the instructions provided to download and install updates using a USB connection to your computer.
First, check the power cord and cigarette lighter socket for any issues. Ensure the power connection is secure. If the problem persists, try using a different power outlet or consult customer support.
Use the volume control buttons located on the device to increase or decrease the alert volume to your preference.
The Whistler GT130Xi does not have built-in GPS capabilities to detect red light cameras. Consider pairing it with a GPS device for this feature.
Locate the reset button on the device and hold it down for a few seconds until you see the reset confirmation on the display.
The Whistler GT130Xi has a detection range of up to several miles in open conditions. However, the range can be affected by terrain, weather, and obstructions.