Whirlpool WRT519SZDG Energy Guide
![Whirlpool WRT519SZDG Refrigerator manual cover](/images/SSgeAwXfZOparWBAQKMOWlMv/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, turn the filter counterclockwise to remove it, and replace it with a new one by turning it clockwise until it locks in place.
To adjust the temperature, use the control panel located inside the fridge. Turn the dial to a higher number for colder temperatures or a lower number for warmer temperatures.
Ensure the vents inside the refrigerator are not blocked, check that the doors are sealing properly, and verify that the temperature settings are correct. If the issue persists, consider contacting a technician.
It is recommended to clean the condenser coils every 6 to 12 months to ensure efficient operation.
The ideal temperature setting is 37°F (3°C) for the refrigerator compartment and 0°F (-18°C) for the freezer compartment.
To prevent ice buildup, make sure the freezer door is closed tightly, avoid placing hot food inside, and ensure the freezer is not overfilled.
Refer to the user manual for a list of error codes and their meanings. Common codes include 'PO' for power outage and 'E' for sensor errors.
Adjust the leveling legs located at the front of the refrigerator. Turn them clockwise to raise the height or counterclockwise to lower it, ensuring the appliance is level for optimal performance.
Check if the bulb is burnt out and replace it if necessary. Ensure the refrigerator is plugged in and the door switch is functioning properly.
Ensure the door seals are in good condition, keep the fridge and freezer compartments organized to allow air circulation, and avoid placing the refrigerator near heat sources.