Whirlpool WDF331PAHB Energy Guide
![Whirlpool WDF331PAHB Dishwasher manual cover](/images/iSwlqMJGgtRqMhCIryqqMpYE/thumbs/thumb175x175.webp)
To reset the Whirlpool WDF331PAHB dishwasher, press the "Start/Resume" button for 3 seconds. This will cancel the current cycle and allow you to start over.
Check the drain hose for kinks or blockages, and ensure the filter is clean. If the problem persists, inspect the air gap and garbage disposal connection.
Remove the lower dish rack, twist the filter counterclockwise, and lift it out. Rinse it under running water until clean, then reinstall by aligning and twisting clockwise.
Unusual noises may be caused by items in the dishwasher touching the spray arm or being improperly loaded. Ensure dishes are not obstructing the spray arms and that they are securely placed.
Use high-quality, automatic dishwasher detergents in either powder, gel, or tablet form. Avoid using hand dishwashing detergents as they can cause excessive suds.
Use a dishwasher cleaner or run an empty cycle with 2 cups of white vinegar on the top rack to remove hard water stains. Regular maintenance can prevent buildup.
Check for obstructions in the door seal area and ensure the latch is not damaged. If the issue persists, inspect the door strike and adjust if necessary.
Clean the filter monthly and inspect the spray arms for clogs. Run a cleaning cycle with a dishwasher cleaner every 3-6 months for optimal performance.
Check for blocked spray arms, ensure the water temperature is at least 120°F, and verify the detergent quality and quantity. Also, ensure proper loading for water access.
Use a rinse aid to enhance drying, select the heated dry option, and ensure the door is slightly ajar after the cycle to allow moisture to escape.