Whirlpool WRT112CZJB Energy Guide
![Whirlpool WRT112CZJB Refrigerator manual cover](/images/IHmBNwZcqWKxQbSEhuqLjtfz/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control dial inside the refrigerator. Turn the dial to a higher number for a colder temperature and to a lower number for a warmer temperature. Allow 24 hours for the temperature to stabilize.
Ensure that the refrigerator is plugged in and the thermostat is set to the correct temperature. Check if the door seals are clean and sealing properly. If the issue persists, consider cleaning the condenser coils located at the back or bottom of the unit.
It is recommended to clean the condenser coils every 6 to 12 months. This helps maintain efficient cooling and prolongs the life of the refrigerator.
Check if the defrost drain is clogged and clear it using warm water. Also, ensure that food items are not obstructing the drainage path. If the leak continues, inspect the water supply line for any signs of damage.
Unplug the refrigerator before changing the light bulb. Locate the bulb cover inside the refrigerator, remove it by unscrewing or unclipping, and replace the old bulb with a new one of the same wattage and size.
Frost build-up can occur if the freezer door is not sealing properly. Check the door gasket for damage and ensure it seals tightly. Avoid frequently opening the door, and make sure the freezer temperature is set correctly.
Ensure the refrigerator is level and that it is not in contact with any surrounding surfaces. Check for loose parts inside and outside the unit. Some noise is normal, such as the sound of the compressor or defrost cycle.
Inspect the door seals for cleanliness and damage. Clean them with warm soapy water and ensure they are dry before closing the door. If the problem persists, verify that the refrigerator is not overfilled, which can cause pressure against the door.
Keep the refrigerator and freezer doors closed as much as possible. Ensure that the door seals are tight and clean. Set the temperature to the recommended settings and avoid overloading the refrigerator.
Regularly clean the condenser coils, check and clean door seals, ensure proper airflow around the refrigerator, and defrost the freezer if there is excessive frost build-up. Additionally, check the thermostat settings and maintain them at optimal levels.