Whirlpool WRT106TFDT Energy Guide
![Whirlpool WRT106TFDT Refrigerator manual cover](/images/UWxqAGktKvTqcFFIvYbYKgjx/thumbs/thumb175x175.webp)
To set the temperature, locate the control panel inside the refrigerator compartment. Adjust the dial to the desired setting. The middle setting is recommended for optimal performance.
If your refrigerator is not cooling properly, check if the vents are blocked. Make sure the door seals are clean and intact. Additionally, verify that the temperature setting is appropriate.
If the freezer is too cold, try adjusting the temperature setting to a warmer setting. Ensure that the vents are not obstructed and that the door seal is functioning correctly.
To troubleshoot ice build-up, check the door seals for damage and ensure they are clean. Make sure items are not obstructing airflow and that the temperature settings are not too low.
It is recommended to clean the condenser coils every 6 months to maintain efficiency. Use a vacuum or soft brush to remove dust and debris.
A blinking light on the control panel may indicate a need for service or a specific error. Refer to the user manual for detailed error codes and troubleshooting steps.
Water pooling can be caused by a blocked defrost drain. Check and clear any obstructions in the drain tube and ensure it is properly connected.
To replace the light bulb, first unplug the refrigerator. Remove the light cover and unscrew the old bulb. Replace it with a new one of the same type and wattage.
Unusual noises can be due to a few reasons such as the refrigerator not being level, items inside vibrating, or issues with the fan or compressor. Check these areas and consult the manual if needed.
To improve energy efficiency, ensure the door seals are tight, keep the refrigerator well-organized, avoid placing hot items inside, and maintain the recommended temperature settings.