Whirlpool WRS571CIHW Energy Guide
![Whirlpool WRS571CIHW Refrigerator manual cover](/images/ikmMqIqBWzZIqXGJmDrKhDin/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment in the upper right corner of the refrigerator. Turn the filter counterclockwise to unlock it, then pull it out. Insert the new filter, aligning the grooves, and turn it clockwise to lock it in place. Run water through the dispenser for 5 minutes to clear any air and impurities.
Check if the ice maker is turned on and the water supply is connected. Ensure the ice bin is properly positioned. If the problem persists, inspect for any ice blockages in the mold or check for a clogged water filter. Defrost any ice build-up and reset the ice maker.
To adjust the temperature, use the control panel located inside the refrigerator. Press the "Refrigerator" touchpad to adjust the fridge temperature and the "Freezer" touchpad for the freezer. Allow 24 hours for the temperature to stabilize after making changes.
Unusual noises can be due to the refrigerator not being leveled, items inside vibrating, or the condenser coils needing cleaning. Ensure the fridge is on a stable surface and check for loose items. Clean the condenser coils every 6 months to maintain efficiency.
Regular maintenance includes cleaning the condenser coils every 6 months, changing the water filter every 6 months, and wiping down door seals to ensure a tight closure. Also, defrost the freezer if ice build-up exceeds a quarter of an inch.
Check if the vents are blocked by food items, preventing air circulation. Ensure the temperature settings are correct and the door seals are clean and intact. If the problem continues, clean the condenser coils and check if the compressor is functioning.
It's not recommended to install your refrigerator next to a heat source like an oven or direct sunlight as it can affect performance and efficiency. Maintain a few inches of clearance from walls and other appliances for proper airflow.
To reset the control panel, unplug the refrigerator from the power source for about 5 minutes. Plug it back in and wait for the control panel to reboot. This can help resolve minor glitches or errors.
Check if the water filter is properly installed and not clogged. Inspect the water supply line for leaks or damages. Ensure the defrost drain is not blocked and clean it if necessary. Regularly check the drain pan for overflow.
Remove all items and clean the interior with a mixture of baking soda and warm water. Place an open box of baking soda or activated charcoal in the fridge to absorb odors. Regular cleaning and airing out can prevent odors from recurring.