Whirlpool WRS335SDHM Energy Guide
![Whirlpool WRS335SDHM Refrigerator manual cover](/images/mkWmPZPSQoWONIlyZBXqFDSI/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it clicks into place. Run water through the dispenser for a few minutes to clear any air and contaminants.
If your refrigerator is not cooling properly, check if the vents are blocked by food items. Ensure the temperature settings are correct. Clean the condenser coils and check the door seals for any gaps. If the problem persists, contact a professional technician.
To reset the ice maker, locate the on/off switch or button, usually near the ice tray. Turn it off and wait for a few minutes before turning it back on. This can help reset the ice production cycle.
Water collecting at the bottom could be due to a clogged defrost drain. Unclog the drain using a mixture of warm water and baking soda, or use a pipe cleaner to remove debris.
Condenser coils should be cleaned every 6 to 12 months. This helps maintain efficient cooling performance and prolongs the life of the refrigerator.
The Whirlpool WRS335SDHM Refrigerator uses the EveryDrop water filter model number EDR1RXD1 or Filter 1. Ensure you replace it every 6 months or as needed.
To adjust the temperature, locate the temperature control panel inside the refrigerator. Use the up or down buttons to set the desired temperature for both the fridge and freezer sections.
If your refrigerator is making loud noises, it could be due to the compressor, fan, or defrost timer. Ensure the refrigerator is level and not touching any walls. If noises persist, consult a technician.
Yes, you can store food in the door compartments. However, avoid placing highly perishable items in the door as it experiences more temperature fluctuations.
If the control panel is not responding, try resetting the refrigerator by unplugging it for a few minutes and then plugging it back in. If the issue continues, check for a lock setting or consult the user manual.