Whirlpool WRF560SEHZ Energy Guide

To reset the water filter light, press and hold the "Filter Reset" button for 3 seconds until the light turns off.
Ensure that the vents inside the refrigerator are not blocked, the door seals are intact, and the temperature settings are correct. If the issue persists, consider contacting a technician for further evaluation.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance.
Excessive frost can occur if the freezer door is not sealing properly or if it is being opened frequently. Check the door seal and minimize door openings.
Locate the water filter in the upper right-hand corner of the refrigerator compartment, turn it counterclockwise to remove, and replace it with a new filter by turning it clockwise until it locks in place.
A loud noise may be due to the refrigerator not being level, items inside vibrating, or a faulty fan motor. Ensure the unit is level and check for loose items. If the noise persists, a service technician may be needed.
To activate the ice maker, make sure the ice maker's power switch is turned on and the water supply to the refrigerator is connected and turned on.
The recommended temperature setting for the refrigerator is 37°F (3°C) and for the freezer is 0°F (-18°C).
To manually defrost the freezer, remove all items, unplug the refrigerator, and leave the freezer door open. Clean up any water from melting ice.
If the water dispenser is not working, check if the water supply line is connected and turned on, the water filter is not clogged, and the dispenser lock is not activated.