Whirlpool WRF535SWHB Energy Guide
![Whirlpool WRF535SWHB Refrigerator manual cover](/images/wWlCaXBDTSPFeQuYgDyfeZao/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the refrigerator. Use the up and down arrows to set the desired temperature for both the refrigerator and freezer compartments.
First, ensure that the refrigerator is level. Check for any loose parts or items inside that might be vibrating. If the noise persists, contact Whirlpool customer service for assistance.
It is recommended to clean the condenser coils every 6 to 12 months to maintain optimal refrigerator efficiency.
The Whirlpool WRF535SWHB features a frost-free freezer, so manual defrosting is not required. However, if ice buildup occurs, check the door seals and ensure the door is closing properly.
To change the water filter, locate the filter compartment, usually at the base grille or inside the refrigerator. Turn the filter counterclockwise, remove it, and install the new filter by turning it clockwise until it locks into place.
Check if the vents inside the refrigerator are blocked, ensure the doors are sealing properly, and verify that the temperature settings are correct. If the issue persists, it might require professional servicing.
Regularly clean the interior with a mixture of baking soda and water. Use sealed containers for food storage and replace the deodorizer pack if your model includes one.
Locate the ice maker's power switch or toggle, turn it off for a few minutes, then turn it back on. This can help reset the unit and resume ice production.
Regularly clean the condenser coils, check door seals for leaks, ensure proper airflow inside, and replace water filters as needed.
First, check the bulb to see if it needs replacement. If the bulb is fine, inspect the light switch mechanism inside the refrigerator door. If the issue continues, consult a technician.