Whirlpool WRB543CMJZ Energy Guide

To adjust the temperature, use the control panel located inside the refrigerator. Press the "Temp" button until you reach your desired setting. The recommended temperature for the refrigerator is 37°F (3°C) and 0°F (-18°C) for the freezer.
First, ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature settings, and make sure the vents inside the fridge are not blocked. If the problem persists, consider cleaning the condenser coils or contacting a technician.
It is recommended to clean the condenser coils every 6-12 months to maintain optimal performance and efficiency.
Store raw meats on the bottom shelf to prevent cross-contamination. Use the crisper drawers for fruits and vegetables, and keep dairy products in the colder zones near the back. Make sure not to overload the shelves to allow proper air circulation.
Ensure the freezer door is fully closed and the gaskets are sealing properly. Avoid placing hot or warm items directly into the freezer. Regularly check and clear the defrost drain to prevent blockages.
Some sounds are normal, such as the hum of the compressor or the defrost timer clicking. However, rattling or grinding noises may indicate a problem. Check if the refrigerator is level and that nothing inside is vibrating. If unusual noises persist, consult a technician.
Locate the water filter compartment inside the fridge. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks. Run water through the dispenser for a few minutes to clear any air from the system.
Ensure the ice maker is turned on and the water supply is connected. Check for ice blockages in the ice maker or bin. If the issue persists, defrost the freezer and inspect the water inlet valve for any issues.
Keep the refrigerator and freezer full but not overcrowded. Ensure the door seals are clean and intact. Set the temperature to the recommended settings and avoid opening the doors frequently. Regularly clean the condenser coils for optimal efficiency.
Yes, it is normal for the exterior sides to feel warm as the heat dissipates from the compressor. However, if it feels excessively hot, ensure there is proper ventilation around the appliance and check the condenser coils for dust buildup.