Viking VDW301WSSS Energy Guide
![Viking VDW301WSSS Dishwasher manual cover](/images/LKqqoVGRFTlYpjUTBqdRZIMZ/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent to the dispenser, close the dishwasher door, select your desired cycle using the control panel, and press the Start button. Ensure the door is latched properly.
Check if the drain hose is kinked or clogged, ensure the sink drain is not blocked, and clean the dishwasher's filter and sump area. If the problem persists, inspect the drain pump or call for professional service.
Ensure dishes are loaded correctly, avoiding overcrowding. Check that the spray arm is not blocked and can rotate freely. Use the recommended amount of detergent and check water temperature.
Regularly clean the filter and check the spray arms for clogs. Inspect and clean the door gasket, and wipe the interior with a damp cloth. Run an empty cycle with a dishwasher cleaner monthly.
Ensure the door is fully closed and latched. Check that the dishwasher is plugged in and the circuit breaker is not tripped. Verify that the control panel settings are correct and try resetting the dishwasher.
Place silverware in the designated basket with some handles up and some down to prevent nesting. Avoid overcrowding and keep knives separated for safety.
Clean the filter and check for food debris in the sump area. Wipe down the door seal and run a cleaning cycle with a cup of white vinegar placed on the top rack.
Inspect the door gasket for damage and ensure the door is closing properly. Check the hoses for any leaks or loose connections. If the problem persists, contact a service professional.
Locate the rinse aid dispenser inside the door. Turn the adjustment dial to increase or decrease the amount dispensed per cycle, depending on your water hardness and drying needs.
Remove the lower rack and locate the filter assembly at the bottom of the dishwasher. Twist to unlock and remove the filter. Clean it under running water with a soft brush, then reinstall securely.