Viking FRI7240W Energy Guide
![Viking FRI7240W Refrigerator manual cover](/images/VGuAlsgNzjmTJTZqLXSpitRd/thumbs/thumb175x175.webp)
The optimal temperature setting for the Viking FRI7240W Refrigerator is 37°F (3°C) for the refrigerator compartment and 0°F (-18°C) for the freezer.
To change the water filter, locate it inside the refrigerator compartment, twist the old filter counterclockwise to remove it, and insert the new filter by twisting it clockwise until it locks into place.
Unusual noises could be due to the refrigerator not being level, items inside vibrating, or the condenser fan. Check the leveling, rearrange items, and inspect the back of the unit for any obstructions.
It is recommended to clean the condenser coils every 6-12 months to maintain efficiency and prevent overheating.
Check if the doors are sealing properly, make sure the vents inside aren't blocked, and inspect the condenser coils for dirt. If the issue persists, consider contacting a professional technician for further diagnosis.
Ensure the door seals are intact and sealing properly, avoid leaving the freezer door open for extended periods, and regularly defrost if ice buildup exceeds 1/4 inch.
To reset the control panel, unplug the refrigerator for 5 minutes, then plug it back in. Alternatively, you can locate the reset button on the control panel and hold it for 10 seconds.
To adjust the shelves, remove any items, lift the front of the shelf, and pull it out. Reposition the shelf at the desired height and ensure it is securely in place.
Keep the refrigerator doors closed as much as possible, ensure the door seals are tight, keep the unit away from heat sources, and set the temperature to the recommended settings.
To activate Sabbath mode, press and hold the "Sabbath" button on the control panel for at least 3 seconds. This mode disables interior lights and certain functions to accommodate observant users.