Viking VDUI5240 Energy Guide
![Viking VDUI5240 Refrigerator manual cover](/images/yQWDwcdUvCDevjOnqRJfmXfW/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrow buttons to set your desired temperature for both the refrigerator and freezer compartments.
Unusual noises can be due to various reasons such as the refrigerator not being level or items inside vibrating. Ensure the unit is properly leveled and check that nothing inside is rattling or vibrating against the sides.
It is recommended to clean the condenser coils every six months to ensure optimal performance. Use a vacuum or a soft brush to remove dust and debris.
First, check if the ice maker is switched on and the water supply is connected. If the problem persists, inspect the water filter and replace it if necessary.
Locate the water filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it, then insert the new filter and turn it clockwise until it locks in place.
Ensure the door seals are clean and create a tight seal. Check the temperature settings and make sure the air vents inside the fridge are not blocked by food items.
Ensure the door is always closed tightly and avoid leaving it open for extended periods. Regularly check the door seals for any damage or debris that might prevent a proper seal.
Use a mixture of mild dish soap and warm water to wipe down the interior surfaces. Avoid using abrasive cleaners or scouring pads that might scratch the surfaces.
To reset the control panel, unplug the refrigerator from the power outlet for about 5 minutes. Then, plug it back in and the control panel should reset.
Check if the defrost drain is clogged and clear it if necessary. Also, ensure the water filter is installed correctly and inspect the water supply line for any leaks.