Viking VCCM12 Cleaning Guide

To descale your Viking VCCM12 Coffee Maker, fill the water reservoir with a mixture of equal parts water and white vinegar. Run a brewing cycle without coffee grounds. After the cycle is complete, rinse the coffee maker by running two cycles of clean water.
If your Viking VCCM12 is not brewing, ensure the coffee maker is plugged in and the power switch is turned on. Check that the water reservoir is filled and properly seated. If issues persist, refer to the troubleshooting section of the manual.
The filter basket of your Viking VCCM12 should be cleaned after every use to prevent coffee residue buildup. Simply remove the basket, rinse it with warm water, and let it dry completely before the next use.
Weak or watery coffee can result from using too little coffee grounds or the incorrect grind size. Ensure you are using the recommended amount of coffee and that the grind size is appropriate for your coffee maker.
Yes, you can brew tea using your Viking VCCM12. Simply place tea bags or loose tea in the filter basket as you would with coffee grounds. Adjust the amount according to your taste preferences.
The Viking VCCM12 is compatible with standard basket-style paper filters. Ensure the filter is properly placed in the filter basket to avoid grounds from spilling into the pot.
To ensure your coffee stays hot, pre-warm the carafe with hot water before brewing. Also, ensure the warming plate is functioning properly and that the coffee maker isn't placed in a drafty area.
When storing your Viking VCCM12, ensure it is completely dry and free of coffee residue. Store it in a cool, dry place, and avoid placing any heavy items on top of it to prevent damage.
If your coffee maker is leaking, check to ensure the water reservoir is not overfilled and that it is properly seated. Inspect the carafe for any cracks and check the filter basket for blockages.
To set the timer, press the 'Program' button on your Viking VCCM12. Use the hour and minute buttons to set your desired brew time. Make sure the display shows "Auto" to ensure the timer is set correctly.