Viking VBCI5150G Energy Guide
![Viking VBCI5150G Refrigerator manual cover](/images/kRKFfGBhmszarYKezaWCsJRT/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the refrigerator compartment. Use the up and down arrows to set the desired temperature. The recommended setting for the fridge is 37°F and 0°F for the freezer.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure that the vents inside the fridge are not blocked. If the problem persists, it may require professional service to inspect the compressor or refrigerant levels.
It is recommended to clean the condenser coils every six months. Dust and debris can accumulate, reducing efficiency. Use a vacuum or a brush to gently clean the coils, which are usually located at the back or bottom of the appliance.
Water pooling can be due to a clogged defrost drain. Clear it by flushing with warm water and a small amount of baking soda. Check the door seals for any damage that might be allowing warm air to enter and condense.
Locate the water filter inside the refrigerator compartment. Turn it counterclockwise to remove it. Insert the new filter and turn it clockwise until it is secure. Run water through the dispenser for a few minutes to clear any air and impurities.
The 'E1' error code usually indicates a problem with the refrigerator's temperature sensor. Check the sensor's connection and condition. If the issue persists, it may need replacement or professional repair service.
Ensure that the refrigerator is level on the floor as uneven surfaces can increase noise. Check that the appliance is not touching the wall or other furniture, and confirm that the condenser fan is clean and free of obstructions.
Yes, it is normal for the exterior walls of the refrigerator to feel warm. This is due to the heat generated by the condenser coils. However, if it becomes excessively hot, check the condenser coils and ensure they are clean.
To activate Sabbath Mode, press and hold the 'Sabbath Mode' button on the control panel for several seconds until the indicator light appears. This mode disables interior lights and alarms to comply with Sabbath observance.
First, ensure the ice maker is turned on and the water supply is connected. Check for any ice blockages in the ice maker's chute. If the issue continues, inspect the water filter and replace it if necessary, as a clogged filter can affect ice production.