Viking RVRF336 Energy Guide

To change the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it is secure. Run water through the dispenser for several minutes to clear any air and impurities.
Check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correct. Clean the condenser coils and ensure that the door seals are intact. If the problem persists, contact a professional technician.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance.
Check if the refrigerator is level and stable. Noises can also be caused by items inside the refrigerator vibrating. Ensure items are properly placed and not touching the back wall of the unit. If the noise persists, it may indicate a problem with the compressor or fan, requiring professional service.
Ensure that the door is closed tightly and that the seals are intact. Avoid placing hot or uncovered food inside the refrigerator. Check the temperature settings and adjust if necessary. Regularly defrost the freezer compartment if frost buildup becomes excessive.
The recommended temperature setting for the refrigerator compartment is 37°F (3°C) and for the freezer compartment is 0°F (-18°C).
To reset the ice maker, turn off the ice maker using the switch. Wait a few minutes and then turn it back on. Ensure the water supply is connected and the freezer temperature is set correctly.
Check if the light bulb is burned out and replace it if necessary. Ensure the refrigerator is properly plugged in and the door switch is functioning.
Remove all food items and shelves. Use a solution of mild detergent and warm water to clean the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing the shelves and food items.
Ensure the refrigerator is placed in a cool area away from heat sources. Keep the door seals clean and intact. Avoid keeping the door open for extended periods. Regularly check and adjust temperature settings according to usage.