Viking RVFFR336 Energy Guide
![Viking RVFFR336 Refrigerator manual cover](/images/pNyxSjVGTAPrUfgdXHqNbNRd/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, turn the old filter counterclockwise to remove it, and insert the new filter by turning it clockwise until it locks into place.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure that the thermostat is set to the correct temperature and that the vents are not blocked. If the problem persists, consult a technician.
It is recommended to clean the condenser coils every 6 months to ensure efficient operation. Use a vacuum or a brush to remove dust and debris.
To defrost the freezer, remove all food items, unplug the refrigerator, and leave the freezer door open. Allow the ice to melt naturally or use a towel to speed up the process. Once defrosted, clean and dry the interior before plugging it back in.
To reset the temperature settings, press the 'Temperature' button on the control panel, then use the '+' or '-' buttons to adjust the temperature to the desired setting. The changes will take effect after a few minutes.
Check if the refrigerator is level and that it is not touching any surrounding objects. Ensure that the items inside are not vibrating. If the noise continues, it might be a sign of a mechanical issue, and you should contact a professional.
Keep the refrigerator in a cool, well-ventilated area, away from heat sources. Ensure the door seals are airtight and avoid opening the door frequently. Set the temperature to the manufacturer's recommended settings.
Remove all food and shelves. Use a mixture of mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing the shelves and food.
Check the water line connections for leaks. Ensure the drain pan is not full and that the defrost drain is not clogged. If the issue persists, consider contacting a service technician.
Ensure the ice maker is turned on and the water supply is connected. Check for ice blockages or kinks in the water line. If necessary, reset the ice maker by turning it off and then on again.