Viking FDW103 Energy Guide

To reset the Viking FDW103 dishwasher, press and hold the "Start/Cancel" button for about 3 seconds until the display clears. This will reset the control panel and cancel any ongoing cycle.
Check the drain hose for kinks or clogs and ensure it is installed correctly. Also, inspect the dishwasher filter and remove any debris that may be obstructing water flow.
Unusual noises can result from items in the dishwasher touching the spray arms or from an unbalanced load. Ensure proper loading and check for any loose items inside the dishwasher.
Locate the filter at the bottom of the dishwasher. Twist and lift it out, then rinse it under running water to remove debris. Reinstall it by aligning and twisting it back into place.
Ensure dishes are loaded correctly, without blocking the spray arms. Check that the detergent dispenser is working and use the recommended amount and type of detergent.
Regular maintenance should be performed monthly, including cleaning the filter, checking the spray arms, and wiping down the door seals to ensure optimal performance.
Refer to the user manual for specific error code meanings. Common codes include 'E1' for water supply issues and 'E2' for draining problems.
Yes, you can use vinegar to clean the interior. Place a cup of vinegar in the top rack and run a hot water cycle to remove odors and mineral buildup.
Regularly clean the filter, ensure proper drainage, and occasionally run an empty cycle with a dishwasher cleaner or vinegar.
Use a high-quality, phosphate-free detergent in either powder, gel, or tablet form. Avoid using too much detergent to prevent residue buildup.