Viking FDSB5482 Energy Guide
![Viking FDSB5482 Refrigerator manual cover](/images/RxhWlCZMMNDJOPzEkfCwtAmL/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, turn the filter counterclockwise to remove it, and insert the new filter by turning it clockwise until it locks into place.
Unusual noises can be due to a variety of reasons, such as the refrigerator not being level, items inside vibrating, or the compressor running. Ensure the appliance is level, secure any loose items, and check if the noise persists.
If your refrigerator is not cooling, check if the temperature settings are correct, ensure the door seals are intact, and verify that the vents are not blocked. If the issue persists, consider contacting a professional technician.
To perform a factory reset, unplug the refrigerator from the power source for about 5 minutes, then plug it back in. The settings should revert to default.
To clean the condenser coils, unplug the refrigerator, locate the coils at the back or bottom, and use a vacuum or brush to remove dust and debris. Regular cleaning helps maintain efficiency.
The recommended temperature setting for the refrigerator compartment is 37°F (3°C) and 0°F (-18°C) for the freezer compartment. Adjust as necessary based on your specific needs.
If the ice maker is not working, check the water supply line for kinks, ensure the ice maker is turned on, and verify that the freezer temperature is set correctly. Clean the ice maker if needed.
Water pooling can be due to a clogged defrost drain. Check and clear the drain hole located at the back of the refrigerator to ensure proper drainage.
The Viking FDSB5482 is frost-free, so manual defrosting is not necessary. However, if frost builds up, contact a service technician to address potential issues with the defrost system.
Regular maintenance tasks include cleaning the condenser coils, replacing the water filter every 6 months, checking door seals for damage, and ensuring the refrigerator is level.