Viking FDFB5303 Energy Guide

To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to set the desired temperature for both the refrigerator and freezer compartments.
First, check if the refrigerator is properly plugged in and the circuit breaker is not tripped. Ensure the vents inside the refrigerator are not blocked by food items. If the problem persists, consider cleaning the condenser coils or contacting a service technician.
It is recommended to clean the condenser coils every 6 months to maintain optimal performance and efficiency.
The refrigerator uses a Viking water filter model number RWFFR. To replace it, locate the filter inside the refrigerator, turn it counterclockwise to remove, and install the new filter by turning it clockwise until it locks into place.
Ensure that the freezer door is completely closed and not left open for extended periods. Check the door seals for any damage or gaps and replace them if necessary. Avoid placing hot or warm food directly into the freezer.
First, check if the bulb is burnt out and replace it if necessary. If the bulb is functional, inspect the light switch for any signs of damage or wear. If the problem persists, contact a service technician for further diagnosis.
To reset the control panel, unplug the refrigerator for about 5 minutes, then plug it back in. This should reset the system. If problems continue, consult the user manual or contact a service technician.
Unusual noises can be due to a variety of reasons such as the compressor, fan, or ice maker. Check if the refrigerator is level, as this can cause vibrations. If noises persist, contact a service technician to inspect the internal components.
Changing the door swing direction involves removing the door and hinge hardware and reinstalling them on the opposite side. Refer to the user manual for detailed instructions or contact a professional for assistance to avoid damage.
Use a mixture of mild detergent and warm water to clean the interior surfaces. Avoid using harsh chemicals or abrasive materials. Remove shelves and drawers for a thorough cleaning and ensure everything is dry before reassembling.