Viking FDBB5363E Energy Guide
![Viking FDBB5363E Refrigerator manual cover](/images/UpxVxLCcSmtFAfGmHjWqfBSO/thumbs/thumb175x175.webp)
To adjust the temperature settings, access the control panel located inside the refrigerator. Use the up and down arrows to set your desired temperature for both the refrigerator and freezer compartments.
Unusual noises can be caused by items inside the refrigerator vibrating. Ensure that everything is properly stored and not touching the walls. Also, check that the refrigerator is level and stable.
It's recommended to clean the condenser coils every 6 months to ensure efficient operation. You can use a vacuum cleaner or a soft brush to remove dust and debris.
If the refrigerator is not cooling properly, check if the temperature settings are correct. Ensure the door seals are intact and clean the condenser coils. If the issue persists, it might require professional servicing.
To change the water filter, locate it inside the refrigerator compartment. Twist the old filter counterclockwise to remove it, and install the new one by twisting it clockwise until secure.
Water pooling can be due to a blocked defrost drain. Clean the drain hole located at the back of the refrigerator to allow proper drainage.
To perform a factory reset, unplug the refrigerator for a few minutes, then plug it back in. This will reset the system settings to default.
It's best to store heavier items on the main shelves rather than the door shelves, as the door shelves are designed for lighter items like condiments and beverages.
Regularly clean the condenser coils, ensure door seals are tight, avoid overloading shelves, and check for any unusual noises or leaks. These practices can help maintain your refrigerator's efficiency and longevity.
To improve energy efficiency, keep your refrigerator full but not overloaded, ensure the door seals are tight, and maintain the recommended temperature settings. Regular cleaning of condenser coils also helps.