Viking FDBB5362 Energy Guide
![Viking FDBB5362 Refrigerator manual cover](/images/qaTxfzDOmzoQgXezXqMzMTnL/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the refrigerator. Use the up and down arrows to set the desired temperature. Allow 24 hours for the temperature to stabilize.
Unusual noises can be due to the unit not being level, items inside vibrating, or the condenser fan. Ensure the refrigerator is on a flat surface and check that nothing inside is causing the noise.
It is recommended to clean the condenser coils every six months to ensure efficient operation. Use a vacuum or a brush to remove dust and debris.
First, check that the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correct. If the problem persists, inspect the door seals for damage or wear.
Locate the water filter inside the refrigerator compartment. Turn it counterclockwise to remove it, then insert the new filter and turn it clockwise until it locks in place.
Water pooling is often due to a clogged defrost drain. Locate the drain inside the refrigerator, unclog it using warm water or a pipe cleaner, and ensure it is clear of debris.
Ensure the refrigerator is not placed near heat sources and that there is adequate space around it for ventilation. Keep the door seals clean and ensure they close properly.
Check that the ice maker is turned on and the water supply is connected. Ensure the water filter is not clogged and replace it if necessary.
To reset the control panel, unplug the refrigerator for about 5 minutes, then plug it back in. This allows the system to reboot and may resolve any glitches.
Regular maintenance includes cleaning the condenser coils, checking and cleaning the door seals, replacing the water filter every six months, and ensuring the unit is level.