Toyota Celica TVIP V5 RS3200 2003 Onwer's Guide

Toyota Celica TVIP V5 RS3200 2003 Sports Car manual cover

Pages 13

Year 2003

Language(s)

of 13

Toyota Celica TVIP V5 RS3200 2003 Sports Car Specification

The 2003 Toyota Celica TVIP V5 RS3200 sports car is a blend of sleek design and advanced engineering, tailored for enthusiasts seeking a dynamic driving experience. Under the hood, it houses a robust 1.8-liter inline-4 engine, capable of delivering 180 horsepower at 7,600 RPM and 125 lb-ft of torque at 6,800 RPM. This powertrain is mated to a 6-speed manual transmission, ensuring precise gear shifts and an engaging drive. The vehicle's lightweight body, constructed with high-strength steel, contributes to its impressive power-to-weight ratio, enhancing acceleration and handling.

The suspension system features independent MacPherson struts at the front and double wishbones at the rear, providing superior ride comfort and stability. The braking system includes ventilated disc brakes on all four wheels, ensuring reliable stopping power even under strenuous conditions. The Celica TVIP V5 RS3200's exterior design is aerodynamically optimized, with a low stance, sharp lines, and a rear spoiler that reduces drag and improves downforce.

Inside, the cabin is driver-focused, featuring sport seats with enhanced lateral support, a leather-wrapped steering wheel, and an intuitive dashboard layout. The infotainment system includes a premium sound system, CD player, and advanced security features, such as the RS3200 Vehicle Security System, which offers keyless entry and an alarm system for enhanced protection.

Safety is paramount, with features like dual front airbags, side-impact beams, and anti-lock braking system (ABS) providing comprehensive occupant protection. The 2003 Toyota Celica TVIP V5 RS3200 encapsulates Toyota's commitment to performance, safety, and cutting-edge technology, making it a standout choice in the sports car segment.

Toyota Celica TVIP V5 RS3200 2003 Sports Car F.A.Q.

How do I program a new key fob for my 2003 Toyota Celica with the TVIP V5 RS3200 system?

To program a new key fob, insert your key into the ignition and cycle it from 'Off' to 'On' five times. Open and close the driver's door twice, then remove the key. The system should enter programming mode. Press any button on the new key fob to program it.

What should I do if the alarm system in my Toyota Celica is not arming?

Check if all doors, the hood, and the trunk are fully closed. Ensure the remote battery is not depleted. If the problem persists, inspect the alarm fuse and wiring for any issues.

How can I disable the beeping sound when locking my Celica with the remote?

To disable the beeping sound, turn the ignition to 'On', and press and hold the lock and unlock buttons on your remote simultaneously for about 2 seconds. The parking lights will flash to confirm the change.

Why does my alarm go off randomly in my 2003 Toyota Celica?

Random alarms can be caused by faulty door sensors, a weak battery, or electrical interference. Check the condition of the car's battery and the door sensors. If needed, consult a professional technician to diagnose further.

What is the procedure for resetting the alarm system after a battery change?

After changing the battery, insert the key into the ignition and turn it to 'On'. Press the alarm reset button located under the dashboard near the steering column. Hold it for a few seconds until the alarm beeps.

How can I test the sensitivity of my Toyota Celica's alarm system?

To test the alarm sensitivity, arm the system and gently shake the vehicle. The alarm should sound if the sensitivity is set correctly. Adjust the sensitivity dial on the alarm control unit if necessary.

What maintenance is required for the TVIP V5 RS3200 system in my Celica?

Regularly check the remote's battery and replace it as needed. Inspect the system's wiring and sensors for wear or damage annually. Consult your vehicle's manual for detailed maintenance instructions.

Can I install an aftermarket alarm alongside the TVIP V5 RS3200?

Yes, you can install an aftermarket alarm system alongside the TVIP V5 RS3200. However, ensure compatibility and consult a professional installer to avoid any conflicts between the systems.

What should I do if the remote stops working?

First, replace the battery in the remote. If it still doesn't work, try reprogramming it using the vehicle's programming procedure. Check for any physical damage to the remote.

Is there a way to temporarily deactivate the alarm system while working on the car?

To temporarily deactivate the alarm system, you can use the valet mode. This is typically done by inserting the key into the ignition, turning it to 'On', and then pressing the valet button located under the dashboard.