Team Losi Racing TLR04008 8IGHT-XE Instruction Manual
![Team Losi Racing TLR04008 8IGHT-XE Race Kit manual cover](/images/JCKBSigtqeiWZPozyIuDeNLH/thumbs/thumb175x175.webp)
To break in your TLR 8IGHT-XE, start by assembling the kit with the recommended setup. Begin with a few slow-paced runs to allow the components to settle. Gradually increase speed while monitoring temperatures and making necessary adjustments.
Regular maintenance includes cleaning the chassis after each run, checking for loose screws, inspecting the suspension for wear, and lubricating the bearings. Additionally, check the drivetrain components and tighten any loose parts.
First, check if the servo is functioning correctly and ensure it is properly centered. Inspect the steering linkage for any binding or damage. Make sure the servo saver is adjusted correctly and not too loose.
Use high-quality batteries and ensure they are fully charged before use. Store batteries at the recommended storage voltage and avoid over-discharging. Regularly balance charge to maintain cell health.
Adjust the shock oil weight and spring tension to suit track conditions. For rough tracks, use softer springs and lighter oil. For smooth, high-grip tracks, harder springs and thicker oil may be beneficial.
Common upgrades include high-performance tires, aluminum shock towers, carbon fiber components, and upgraded servos for better responsiveness and durability.
Install protective parts such as skid plates and shock guards. Regularly inspect and replace worn components. Consider upgrading to heavy-duty parts where possible.
Ensure proper gearing by checking the gear ratio. Improve airflow around the motor and consider using a heatsink or fan. Reduce run times to prevent excessive heat buildup.
Adjust the placement of the battery and electronics to achieve a balanced weight distribution. Use additional weights if necessary to fine-tune handling.
Signs of a failing servo include sluggish or erratic movement, strange noises, and the inability to hold a steady position. If these symptoms occur, inspect the servo for damage and consider replacement.