TCL F95SDW Operating Manual

To set the temperature, locate the control panel inside the refrigerator. Use the up and down arrows to adjust the temperature to your desired setting. Ensure the doors are closed properly to maintain the set temperature.
Noises can result from the compressor, fans, or ice maker. Check if the refrigerator is level and ensure it's not touching any walls or other appliances. If the noise persists, consult the user manual for troubleshooting or contact customer support.
It's recommended to clean the condenser coils every six months. Use a vacuum cleaner or a coil brush to remove dust and debris, ensuring the refrigerator operates efficiently.
First, check the thermostat setting and make sure nothing is blocking the air vents. Clean the condenser coils and inspect the door seals for any gaps. If these steps don't resolve the issue, contact a professional technician.
Locate the water filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it clicks into place. Run water through the dispenser for a few minutes to clear any air or impurities.
It's best to let hot food cool to room temperature before placing it in the refrigerator. Storing hot items can raise the internal temperature, affecting the efficiency and safety of other stored foods.
The TCL F95SDW Refrigerator typically features an automatic defrost system. However, if manual defrosting is needed, remove all items from the freezer, unplug the refrigerator, and leave the freezer door open. Once defrosted, clean and dry the interior before plugging it back in.
Keep dairy products and eggs on the middle shelves, store raw meat in the bottom drawer, and use the crisper drawers for fruits and vegetables. Avoid overloading shelves to ensure proper air circulation.
Ensure the refrigerator is in a cool, well-ventilated area and away from heat sources. Keep the door seals clean and ensure they close tightly. Regularly clean the condenser coils and avoid placing hot food inside.
To reset the control panel, unplug the refrigerator for about 5 minutes. Plug it back in and allow the system to reboot. This can resolve minor glitches with the control interface.