TCL F145CFW Operating Manual
![TCL F145CFW Refrigerator manual cover](/images/WLuMpvHtMHwcSfvhTuzjUAhy/thumbs/thumb175x175.webp)
To set the temperature, use the control panel located inside the refrigerator. Adjust the dial to the recommended setting, usually between 37°F (3°C) for the refrigerator section and 0°F (-18°C) for the freezer. Allow 24 hours for the temperature to stabilize.
First, check if the refrigerator is plugged in and the power is on. Make sure the temperature settings are correct. Inspect door seals for any gaps and ensure the vents inside are not blocked. If the problem persists, consult the manual or contact customer support.
It's recommended to clean the refrigerator every 3 to 4 months. Remove all food, shelves, and drawers, then clean with a mixture of baking soda and water. Rinse and dry thoroughly before reassembling.
To defrost, remove all items, unplug the refrigerator, and leave the freezer door open. Place towels to absorb water. Once defrosted, clean and dry the compartment before plugging the unit back in.
Unusual noises can result from the refrigerator not being level, items inside vibrating, or normal operational sounds like defrost cycles. Check the manual for noise descriptions. If noises persist, consider seeking technical assistance.
Ensure the refrigerator is positioned away from heat sources and direct sunlight. Keep door seals clean and intact, minimize door opening, and ensure proper ventilation around the unit. Adjust temperature settings to recommended levels.
First, check if the refrigerator is properly connected to power. If the light is still not working, it might need a replacement bulb. Refer to the manual for the correct bulb type and replacement procedure.
Regularly clean the interior using a solution of baking soda and water. Store food in airtight containers and use baking soda boxes or activated charcoal to absorb odors. Ensure proper ventilation inside the fridge.
Yes, it is normal for the sides to feel warm. This is due to the heat dissipation process, which prevents condensation. Ensure that there is enough clearance around the refrigerator for proper airflow.
Refer to the user manual for the specific location of the filter. Turn off the water supply, remove the old filter, and install the new one by following the instructions provided. Reset the filter indicator if applicable.