Subaru Crosstrek 2.0i Limited 2016 Guide
![Subaru Crosstrek 2.0i Limited 2016 manual cover](/images/AlRsCXhDlGGxujRiHKnoZHhm/thumbs/thumb175x175.webp)
To reset the maintenance reminder, turn the ignition to the "ON" position without starting the engine. Use the controls on the steering wheel to navigate to the settings menu, select "Maintenance," and then follow the prompts to reset the reminder.
Subaru recommends using synthetic 0W-20 oil for the Crosstrek 2.0i Limited 2016 to ensure optimal performance and fuel efficiency.
If your vehicle does not start, check the battery connections for corrosion or looseness. Ensure the battery is charged. If the battery is fine, consider checking the starter and ignition system or consult a mechanic.
The recommended tire pressure for the Subaru Crosstrek 2.0i Limited 2016 is typically 33 psi for the front and rear tires. Always refer to the sticker located on the driver's side door jamb for exact specifications.
It is generally recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the filter during regular maintenance to see if it needs more frequent replacement.
If the check engine light comes on, first ensure the gas cap is tightly secured. If the light remains on, have the vehicle's diagnostic codes read by a professional to identify the issue.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the connector and the old bulb by twisting it counterclockwise. Insert the new bulb by twisting it clockwise, and reconnect the connector.
To pair your phone, turn on the Bluetooth feature on your phone. Navigate to the car's infotainment system, select "Bluetooth," then "Add Device." Follow the prompts on your phone and the car display to complete the pairing process.
The towing capacity for the Subaru Crosstrek 2.0i Limited 2016 is 1,500 pounds. Always ensure that your trailer and load do not exceed this limit for safe towing.
To change the cabin air filter, open the glove box and remove the damper arm. Press in on the sides of the glove box to lower it completely. Locate the cabin air filter cover, unclip it, and replace the old filter with a new one. Reassemble in reverse order.