Subaru BRZ Limited 2017 Guide
![Subaru BRZ Limited 2017 manual cover](/images/OCApETLJNpWjStNmjUyWokFg/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, first ensure all tires are inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS reset button (usually located beneath the steering wheel) until the TPMS indicator light blinks twice. Release the button and start the vehicle. The system should reset within a few minutes of driving.
The recommended oil type for the Subaru BRZ Limited 2017 is 0W-20 synthetic oil. This oil type provides optimal engine performance and fuel efficiency. Always refer to the owner's manual for any specific requirements.
To pair your phone with the Subaru BRZ Limited 2017's Bluetooth system, first ensure Bluetooth is enabled on your phone. On the car's multimedia system, navigate to the Bluetooth settings and select "Add Device." Select your car's Bluetooth name on your phone and confirm the pairing request by matching the PIN displayed on both devices.
If the engine overheats, immediately pull over to a safe location and turn off the engine. Wait for the engine to cool down before checking the coolant level. Refill the coolant if necessary, and inspect for any leaks or damage. If the problem persists, seek professional mechanical assistance.
Brake pads should generally be replaced every 25,000 to 70,000 miles, depending on driving habits and conditions. Regular inspections during maintenance visits will help determine the precise timing for replacement.
To change the cabin air filter, open the glove box and remove the retaining arm. Squeeze the sides of the glove box to release it from its hinges. Locate the air filter compartment behind the glove box, open the cover, and replace the old filter with a new one. Reassemble the glove box components.
The Subaru BRZ Limited 2017 is not designed for towing. It's recommended to avoid using this vehicle for towing purposes to prevent damage to the vehicle's drivetrain and suspension.
To perform a factory reset on the infotainment system, navigate to the system settings menu. Select "Restore Factory Settings" and confirm your choice. This will erase all personal data and settings, restoring the system to its original state.
The recommended tire pressure for the Subaru BRZ Limited 2017 is typically 35 psi for both front and rear tires. Always refer to the placard located on the driver's side door jamb for the most accurate information.
To jump-start the Subaru BRZ Limited 2017, first ensure both vehicles are turned off. Connect the positive cable to the positive terminal of the dead battery, and then to the positive terminal of the booster vehicle. Connect the negative cable to the negative terminal of the booster vehicle, and then to an unpainted metal surface on the BRZ. Start the booster vehicle, then the BRZ. Once started, remove the cables in reverse order.