Sony XR-83A90J Setup Guide
![Sony XR-83A90J manual cover](/images/5f988066373901aa3dad8fef/thumbs/thumb175x175.webp)
To connect your Sony XR-83A90J to Wi-Fi, go to Settings > Network & Internet > Wi-Fi, then select your network and enter the password if prompted.
Ensure that the HDMI cables are properly connected and check the Picture Mode settings. You can adjust the settings under Settings > Display & Sound > Picture.
To perform a factory reset, go to Settings > Device Preferences > Reset, and select 'Factory data reset'. Confirm your choice to reset the TV.
To update the software, go to Settings > Device Preferences > About > System update. Follow the on-screen instructions to complete the update.
For the best viewing experience, use the 'Cinema' or 'Custom' Picture Mode, and adjust the Brightness, Contrast, and Color settings to your preference.
Check if the TV is muted or if the volume is set too low. Ensure that external audio devices are properly connected and configured under Settings > Display & Sound > Audio Output.
To enable parental controls, go to Settings > Device Preferences > Parental Controls, and set up restrictions based on your preferences.
Check the batteries in the remote and replace them if necessary. Make sure there are no obstructions between the remote and the TV. You can also try resetting the remote by removing the batteries and pressing all the buttons.
Connect external devices such as gaming consoles or Blu-ray players via HDMI ports. Ensure the TV input source is set to the corresponding HDMI port.
Regularly dust the screen and the vents. Avoid using harsh chemicals; instead, use a soft, dry cloth for cleaning. Ensure the TV is placed in a well-ventilated area to prevent overheating.