Sony XBR-65X930C Setup Guide
![Sony XBR-65X930C manual cover](/images/0a17041fa0798c7e3c1b49b5/thumbs/thumb175x175.webp)
To connect your Sony XBR-65X930C to a Wi-Fi network, go to 'Settings' > 'Network' > 'Network Setup' > 'Wireless Setup'. Select your Wi-Fi network from the list and enter the password when prompted.
To perform a factory reset on your Sony XBR-65X930C, go to 'Settings' > 'Storage & Reset' > 'Factory data reset'. Confirm by selecting 'Erase everything'.
If your Sony XBR-65X930C is not turning on, ensure that the power cord is securely connected. Check the power outlet with another device. If the issue persists, try a different power outlet or contact Sony support.
To update the software on your Sony XBR-65X930C, go to 'Settings' > 'About' > 'System software update'. Follow the on-screen instructions to download and install any available updates.
To adjust the picture settings, press the 'Home' button on your remote, then go to 'Settings' > 'Picture & Display' > 'Picture adjustments'. From there, you can adjust brightness, contrast, and other picture settings.
Ensure that Bluetooth is enabled on your Sony XBR-65X930C by going to 'Settings' > 'Bluetooth settings'. Make sure the device you are trying to connect is in pairing mode and within range.
Yes, you can control your Sony XBR-65X930C using the 'Sony | TV SideView' app available for iOS and Android. Download the app and connect it to the same Wi-Fi network as your TV.
To clean the screen of your Sony XBR-65X930C, use a soft, dry microfiber cloth. Gently wipe the screen to remove dust and fingerprints. Avoid using any harsh chemicals or water directly on the screen.
To enable HDR on your Sony XBR-65X930C, go to 'Settings' > 'Picture & Display' > 'Picture adjustments' > 'HDR mode'. Ensure that your content supports HDR for the best experience.
If there is no sound coming from your Sony XBR-65X930C, check the volume level and ensure it is not muted. Verify that external speakers are properly connected if in use. If the issue persists, go to 'Settings' > 'Sound' > 'Audio Output' to troubleshoot further.