Sony SRS 77G User's Guide

To pair your Sony SRS 77G with a Bluetooth device, turn on the speaker and press the Bluetooth button until the indicator starts flashing. On your device, enable Bluetooth and select "SRS 77G" from the list of available devices.
If your speaker won't turn on, ensure it is charged by connecting it to a power source using the supplied USB cable. If it still doesn't turn on, try resetting the speaker by pressing and holding the power button for 10 seconds.
To reset your Sony SRS 77G, press and hold the power button for about 10 seconds until the speaker turns off. Release the button and turn the speaker back on.
To clean your Sony SRS 77G, use a soft, dry cloth to gently wipe the exterior. Avoid using water or cleaning agents directly on the speaker to prevent damage.
To improve battery life, avoid exposing the speaker to extreme temperatures and fully charge it before use. Turn off the speaker when not in use and reduce the volume level to conserve battery power.
Sound distortion can occur due to low battery, interference, or high volume. Ensure the speaker is fully charged, reduce the volume, and move the speaker away from other electronic devices.
Yes, you can use your Sony SRS 77G speaker while it is charging. Connect it to a power source using the supplied USB cable, and it will continue to function as normal.
To update the firmware, download the latest version from the Sony support website to your computer. Connect the speaker to your computer using a USB cable, and follow the instructions provided with the firmware download.
If the speaker is not connecting, make sure it is in pairing mode and the Bluetooth function is enabled on your device. If problems persist, try resetting the speaker and removing any previous pairings stored on your device.
Yes, the Sony SRS 77G is designed to be water-resistant, making it suitable for use in environments where it might be exposed to splashes of water. However, it should not be submerged in water.