Sony SAVA 57 User's Guide
![Sony SAVA 57 manual cover](/images/b3eeca163ad6ea95451ccedb/thumbs/thumb175x175.webp)
To connect the Sony SAVA 57 to your TV, use the audio output jacks on your TV to connect to the input jacks on the speaker system using RCA cables. Ensure the connections are secure and select the correct input source on the SAVA 57.
Check the speaker connections and ensure that the system is powered on. Verify that the correct input source is selected and the volume is turned up. If the issue persists, check the audio output settings on the connected device.
Position the speakers appropriately to avoid obstructions, and adjust the bass and treble settings on the speaker system. Ensure that the room acoustics are suitable and consider using high-quality audio cables.
Regularly dust the exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Periodically check the speaker connections for any looseness or corrosion.
The Sony SAVA 57 does not natively support Bluetooth. To use it with a Bluetooth device, you can connect a Bluetooth receiver to the audio input.
To reset the Sony SAVA 57 to factory settings, unplug the unit from the power source for a few minutes and then plug it back in. This will reset the system to its default settings.
A buzzing noise can be caused by interference from other electronic devices, loose connections, or grounding issues. Ensure all connections are secure and try relocating the speaker system away from other electronics.
Use the bass and treble adjustment knobs located on the front panel of the speaker system to fine-tune the audio to your preference.
Check the batteries in the remote control and replace them if necessary. Ensure there are no obstructions between the remote and the speaker system and that you are within range.
To clean the fabric covers, gently vacuum with a soft brush attachment or use a lint roller. Avoid using water or cleaning solutions, as these can damage the fabric.