Sony KD-85X91CJ Setup Guide

To connect your Sony KD-85X91CJ to a Wi-Fi network, press the Home button on your remote, then go to Settings > Network & Internet > Wi-Fi. Select your Wi-Fi network from the list and enter the password to connect.
If the screen is flickering, try resetting the picture settings: go to Settings > Display & Sound > Picture. If the issue persists, check for software updates in Settings > Device Preferences > About > System Update.
To perform a factory reset, go to Settings > Device Preferences > Reset. Select Factory data reset, then confirm by choosing Erase everything. This will restore the TV to its original settings.
Ensure that the volume is not muted and is set to an audible level. Check the audio output settings in Settings > Display & Sound > Audio Output. Additionally, verify that external audio devices are properly connected.
To update the software, navigate to Settings > Device Preferences > About > System Update. If an update is available, follow the on-screen instructions to download and install it.
For optimal viewing, consider setting the Picture Mode to Cinema or Custom. Adjust the Brightness, Contrast, and Color settings to your preference under Settings > Display & Sound > Picture.
Connect external devices such as gaming consoles or Blu-ray players via the HDMI ports located on the back of the TV. Use the Input button on the remote to select the appropriate HDMI input.
Replace the batteries in the remote and ensure there are no obstructions between the remote and the TV sensor. If it still doesn't work, try pairing the remote again by following the instructions in the user manual.
To enable subtitles, press the Subtitle button on your remote or go to Settings > Accessibility > Captions. Turn on the captions and customize the appearance as needed.
Yes, the Sony KD-85X91CJ supports voice commands. Use the Google Assistant button on the remote to start voice control. Ensure the TV is connected to the internet for full functionality.