Sony DCR-DVD101 User's Guide

To finalize a disc, insert the disc into the camcorder, switch to Playback mode, then select 'Finalize' from the disc menu. Follow the on-screen instructions to complete the process.
Check if the battery is charged and properly connected. If the issue persists, try using the AC power adapter. If the camcorder still doesn't turn on, reset the device by removing the battery and power source for a few minutes before reconnecting them.
Use a USB cable to connect the camcorder to your computer. Ensure the camcorder is in Playback mode. Your computer should recognize the device, allowing you to transfer files via the file explorer or appropriate software.
The Sony DCR-DVD101 is compatible with 8cm DVD-R, DVD-RW, and DVD+RW discs. Be sure to check the disc's compatibility before purchasing.
Use a soft, dry cloth to gently wipe the lens. Avoid using any cleaning solutions or abrasive materials to prevent damage.
Ensure the volume is turned up and not muted. Check if the audio was recorded properly by playing the disc on another device. If the issue continues, there might be a problem with the microphone or audio settings.
To maximize battery life, fully charge the battery before use, avoid recording in extreme temperatures, and reduce the use of the LCD screen by using the viewfinder when possible.
First, ensure the camcorder is off. Then, turn it on and try to eject the disc. If it remains stuck, gently open the disc cover and carefully remove the disc. If the problem persists, consult the user manual or contact customer support.
To reset the camcorder, locate the reset button on the device, usually found under the battery cover or near the control panel. Use a pointed object to press and hold the button for a few seconds.
Yes, the camcorder has a NightShot feature that allows recording in low light. Activate it by sliding the NightShot switch to the 'On' position. Note that the image will be in monochrome when this feature is used.