Sauter SFE910BI User Manual
![Sauter SFE910BI Oven manual cover](/images/uIKYbUvbFqDDbPatorvgdOVI/thumbs/thumb175x175.webp)
To set the timer, press the 'Timer' button, then use the '+' and '-' buttons to adjust the desired time. Press 'Start' to activate the timer.
Check that the oven is properly plugged in and the circuit breaker has not tripped. Ensure that the temperature settings are correct and the door is fully closed. If the problem persists, consult the user manual or contact customer support.
Use a soft cloth and a mild detergent to wipe down the interior. For tougher stains, use a baking soda and water paste. Avoid abrasive cleaners and ensure the oven is cool before cleaning.
The fan may make noise if it is obstructed or dirty. Turn off the oven, allow it to cool, then check for any obstructions or dust buildup. Clean carefully if necessary.
Ensure the oven is turned off and cooled down. Unscrew the protective cover inside the oven and replace the bulb with a new one of the same type and wattage. Reattach the cover securely.
Regularly clean the interior and exterior surfaces. Check the door seals for any damage and replace if necessary. Ensure the vents are not blocked and inspect the power cord for any wear or damage.
Ensure accurate temperature settings and preheating before placing food inside. Use recommended cooking times and regularly check on the food. Utilize the timer to avoid overcooking.
Error code E1 usually indicates a temperature sensor fault. Try resetting the oven by turning it off and on. If the error persists, contact a qualified technician for repair.
Yes, aluminum foil can be used, but avoid covering the entire oven rack as it can block airflow. Do not let the foil touch the oven's heating elements.
To perform a factory reset, press and hold the 'Reset' button for about 10 seconds until the display resets. Refer to the user manual for detailed instructions specific to your model.