Sandstrom SMWLL11 Quick Start Guide
![Sandstrom SMWLL11 manual cover](/images/vPaBWVXCcpEoJrCCOGlyCcmI/thumbs/thumb175x175.webp)
To connect the Sandstrom SMWLL11 mouse, plug the USB receiver into an available USB port on your computer. Turn on the mouse using the switch located on the bottom. The device should automatically pair with your computer.
First, ensure that the mouse is turned on and the USB receiver is properly connected. Check the battery and replace it if necessary. Try connecting the USB receiver to a different port. Restart your computer and try again.
To clean the mouse, use a soft, dry cloth to wipe the exterior. For more stubborn dirt, slightly dampen the cloth with water or isopropyl alcohol. Ensure the mouse is turned off and not connected to the computer while cleaning.
The Sandstrom SMWLL11 mouse typically provides up to 12 months of battery life, depending on usage. To conserve battery, turn off the mouse when not in use.
To change the battery, turn off the mouse and slide open the battery compartment cover on the bottom. Remove the old battery and replace it with a new AA battery, ensuring the positive and negative terminals are aligned correctly.
The Sandstrom SMWLL11 mouse does not feature customizable buttons. It is designed for straightforward plug-and-play use without the need for additional software.
The sensitivity of the Sandstrom SMWLL11 mouse can typically be adjusted through your computer's operating system settings. Access the mouse settings in your control panel or system preferences to change the pointer speed.
Yes, the Sandstrom SMWLL11 mouse is compatible with Mac computers. Simply plug the USB receiver into a USB port on your Mac, and it should work without the need for additional drivers.
The Sandstrom SMWLL11 mouse may not perform optimally on glass surfaces. It is recommended to use the mouse on a mouse pad or a non-reflective, opaque surface for best results.
For connection issues, ensure the USB receiver is securely connected and the mouse is powered on. Try reconnecting the USB receiver to another port. Replace the battery if needed, and check for any interference from other wireless devices.