Samsung The Freestyle LSP3B Quick Setup Guide
![Samsung The Freestyle LSP3B Projector manual cover](/images/vZHcfnaVihpmhTaqAcFXHtNp/thumbs/thumb175x175.webp)
To connect the projector to a Wi-Fi network, navigate to Settings > Network > Network Settings. Select your Wi-Fi network from the list and enter the password if required.
Use the Keystone correction feature to adjust the image alignment. Go to Settings > Picture > Keystone Correction and make the necessary adjustments until the image is properly aligned.
To update the firmware, navigate to Settings > Support > Software Update. Select Update Now and follow the on-screen instructions to complete the update process.
To clean the lens, use a microfiber cloth to gently wipe the surface. Avoid using liquids or abrasive materials as they may damage the lens.
You can connect external speakers via Bluetooth or use the audio out port on the projector. Go to Settings > Sound > Sound Output to select your preferred audio output method.
Ensure that the projector is placed in a well-ventilated area and that the vents are not blocked. If the problem persists, turn off the projector and allow it to cool down before using it again.
Use the Screen Mirroring feature by enabling it on your smartphone and selecting the projector from the list of available devices. Ensure both devices are connected to the same Wi-Fi network.
To adjust the brightness, go to Settings > Picture > Brightness and use the slider to increase or decrease the brightness level according to your preference.
To reset the projector, navigate to Settings > General > Reset and enter your PIN if prompted. Confirm the reset to restore factory settings.
While the projector can be used outdoors, ensure it is protected from direct sunlight, moisture, and dust. Use a stable surface and consider using a portable screen for optimal viewing.