Samsung C650 Series Quick Setup Guide
![Samsung C650 Series TV manual cover](/images/CKVCltKmgRtJqRMqAexyBTdO/thumbs/thumb175x175.webp)
To connect your Samsung C650 TV to the internet, go to Menu > Network > Network Settings. Choose your preferred connection type (Wireless or Wired) and follow the prompts to connect to your network.
If your Samsung C650 TV screen is flickering, try adjusting the Picture Settings by going to Menu > Picture > Picture Mode. Ensure that the cables are securely connected and try a different HDMI port if needed.
To update the firmware, navigate to Menu > Support > Software Update > Update Now. Ensure your TV is connected to the internet or use a USB drive with the firmware downloaded from the Samsung website.
Ensure the TV is not muted and the volume is turned up. Check the Audio Output settings under Menu > Sound. Verify that any external speakers or sound systems are properly connected.
To perform a factory reset, go to Menu > Support > Self Diagnosis > Reset. Enter your PIN (default is 0000) to restore the TV to its original settings.
Yes, you can use screen mirroring. Go to Menu > Network > Screen Mirroring and follow the instructions to connect your compatible device.
Press the Source button on your remote control to cycle through available input sources. Alternatively, go to Menu > Source List and select your preferred input.
Check if the power cable is securely connected and the outlet is working. Try using the power button on the TV itself. If the issue persists, unplug the TV for a few minutes and try again.
Adjust the Picture Settings by going to Menu > Picture and selecting a suitable Picture Mode. You can also fine-tune settings such as Brightness, Contrast, and Sharpness.
First, replace the batteries in the remote. Ensure there are no obstructions between the remote and the TV. If it still doesn't work, try resetting the remote by removing the batteries and pressing the power button for 8 seconds.