English - 2
BN68-03778A BN68-03778A-00
Setting the Clock
Before you can use your TVs On/Off Timer, you must set the clock. To set the clock, follow these steps:
1. Turn on your TV.
2. Using your remote, press the MENU button on your remote. Then, select Setup Time.
3. Select Clock Mode, and then press the ENTERE button. Set Clock Mode to Auto or Manual.
Select Auto if you have a digital channel in your area and are not using a cable/sat box.
4. Select Clock Set, and then press the ENTERE button. The Clock Set screen appears.
5. Using the number buttons on your remote, enter the Month, Day, Year, Hour, and Minute. Use the or button to move between entry elds.
6. Press the RETURN button on your remote when done.
Connecting a USB Device for Media Play
You can enjoy photo and music les stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps:
1. Turn on your TV.
2. Connect a USB device containing photo and music les to the USB jack on the rear of the TV.
3. When the Application selection screen appears, press the ENTERE button on your remote to select Media Play (USB).
Remote Control Buttons and Functions:
MEDIA.P
A B C D
FAV.CH
Return to the previous channel.
Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV.
MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
P.SIZE: Picture size selection.
CC: Controls the caption decoder.
Cut off the sound temporarily.
Display favorite channel lists on the screen.
Press to display information on the TV screen.
Exit the menu.
Change channels.
Display the main on-screen menu.
Changing the Picture Mode Your TV has three preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under speci c conditions.
The Picture Modes are listed and described in the table below:
Mode Description
Dynamic Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room.
Standard For a bright, detailed picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
1. With the TV on, press the TOOLS button on your remote. The Tools menu appears.
2. Using the or on your remote, select Picture mode.
3. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want.
4. Press the EXIT button to exit the menu.
Viewing the On Screen Menus To view the On Screen Menus, follow these steps:
1. With the power on, press the MENU button on your remote. The main menu appears. The menus left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application, and Support.
2. Press the or button on your remote to select a menu option, and then press the ENTERE button.
3. When done using the menu, press the EXIT button on your remote to exit.
MEDIA.P
A B C D
FAV.CH
MENU
Changing the Screen Size Your TV has several screen size options, each designed to work best with speci c types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The rst time you press it, your TV displays the current setting. Thereafter, each time you press the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen
Wide Fit
Zoom 1
4:3 Standard screen
Zoom 2
Screen Fit
Screen Fit displays a full HD picture covering the entire screen with no cutoff on any side. It is only available when your TV inputs an HDMI (720p, 1080i, 1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.
Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/ DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time you press the SOURCE button, you change to a different source.
Changing Channels and Adjusting the Volume
ChannelVolume
Change the channels by pressing the z button on the remote.
If your TV is attached to a cable or satellite box, change the channel using the boxs remote.
Adjust the volume by pressing the y button on the remote.
MEDIA.P
A B C D
SLEEP MEDIA.P
A B C D
SLEEP MEDIA.P
A B C D
SLEEP
Basic Functions
Clock Set
L Move U Adjust E Enter R Return
Month
Hour
Day
Minute
Year
am/pm
--
--
--
--
----
--
L Move E Enter R Return
Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Press number buttons for direct access to channels.
Turns the TV on and off.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Use these buttons to select On Screen Menu items and change menu settings.
Return to the previous menu.
View the Media Play.
Colored button
en
en